AL6061 Aluminum Alloy CNC Mechanical Parts Black Oxide Surface

Aluminum Alloy Machined Metal Parts CNC Mechanical Parts Black Oxide Surface

Company Profile-Toxmann.pdf

Processing & Inspection Machine List.pdf

^{There are many kinds of products processed by CNC machine tools, among which aluminum parts are one of the most processed. When using CNC machine tools to process aluminum parts, you must pay attention to these places if you want to make the processing dimensions more stable.}

^{1. The state of the machine tool. Whether the processing is stable or not depends to a large extent on the state of the machine tool itself. Before processing, we have to check the machine tool itself and start the equipment after there is no problem.}

^{2. Material cooling problem. The workpiece may deform after cooling. This situation is often unavoidable, and special attention needs to be paid to the use of coolant at this time. The possibility of material deformation should also be considered when performing in-situ measurements.}

^{3. Processing technology. The unreasonable processing technology can easily cause the size error of the workpiece. In ensuring the basic processing technology (such as "coarse first, then fine, first face and then hole, first large face and then small face" in milling CNC machining or "reduce the number of clamping times and try to use combined fixtures" in the use of fixtures. Basic machining process details) On the basis of this, it is necessary to minimize the machining error caused by iron filings to aluminum parts.}

^{4. Parameter setting. Cutting factors such as cutting speed, feed, depth of cut and tool compensation will affect the stability of machining, so special attention should be paid.}

^{5. Tool selection. When machining aluminum parts, try to use special tools, which are often more targeted. For example, the milling cutter specially used for milling aluminum usually has a larger rake angle and helix angle, and the cutting edge is sharper, which is more conducive to the processing of aluminum parts (such as anti-built-up edge), and the surface quality will be better.}

^{6. Stress. The aluminum material is soft, so you need to pay special attention to the clamping force. In addition, during processing, the aluminum parts are roughed and left for a period of time before proceeding to the next process to eliminate stress.}

^{In addition, aluminum parts should also pay attention to chip removal and the amount of cutting fluid used in the processing of aluminum parts. There are many factors affecting the processing stability of aluminum parts, so it is necessary to respond flexibly during processing, and analyze specific problems in detail. Stable machine tools, reasonable machining techniques and tools, and the skill level of operators are all factors that affect product quality.}

Product Information:

Toxmann Capability for Machined Parts:

Our Quality and Lead Time Objectives:

<sup>1. Sample acceptable rate reaches to 100%
2. The qualified rate of finished products reaches to 100%
3. Delivery on time rate reaches to 100%</sup>

Toxmann Promise: