SKD61 SKH51 Precision Mold Parts , Medical Industry Die Punch Pins

^{Mold accessories (parts) refer to the general term for metal accessories used exclusively in the mold industry for stamping molds, plastic molds or FA automation equipment. Die accessories include: punching needle, punch, guide post, guide sleeve, thimble, cylinder, steel ball sleeve, no oil guide sleeve, no oil slide plate, guide post components, etc.}

^{Plastic mold accessories
Single-section shooting tip, double-section shooting tip, double-section shooting tip, flat tip, flat tip, positioning column, plastic mold guide sleeve, straight sleeve, middle column sleeve, plastic mold guide sleeve, straight sleeve, middle support sleeve, positioning column , Square auxiliary device, Stereo positioning block group guide auxiliary device, A, B, C type filling nozzle, fixed ring A, B type, standard mechanical switch, square auxiliary device, small nozzle standard special nozzle liner Sleeves, standard special nozzle bushings for large nozzles, mold date indicating devices, resin switches, water stop plugs, finished tips for plastic molds, pen cores, pen tubes, small tie rod C type, diagonal support tips, pull material tips, plastic Die guide posts, tie rods, return pins, springs, thimbles, cylinders, garbage nails, etc.}

^{Metal stamping die accessories
H-type straight punch, A-type secondary punch, edge forming punch, K-type budding punch, B-type guide punch, A-type mother and daughter punch, punch, die, bushing, high-speed steel Round bar, ultra-fine particle tungsten steel round bar, powder high-speed steel round bar, floating pin, floating material pin, stop screw, positioning pin (fixed pin), contour sleeve, guide post, guide sleeve, precision grade chrome-plated guide Column, precision grade copper-titanium alloy guide bush, self-lubricating guide bush, inner guide post assembly, sliding guide post assembly for die base, ball guide post assembly for die base, dismantling ball guide post assembly, outer guide post assembly, steel ball Sleeves (retainers), independent guide posts, hexagon screws, contour screws, etc.}

^{Manufacturing materials
The materials of mold parts are usually tungsten steel, high-speed steel, bearing steel, stainless steel, brass, metal alloy, spring steel, carbide steel}

^{1. Provide the detailed production schedule for each order.}

^{2. Offering production status with video and photos for each component.}

^{3. Manufacture the parts base on customers' drawings to meet the quality requirements and industry standard.}

^{4. Over 99% orders can meet the lead time requirement.}

^{5. Respond to the enquiry within 24 hours and offer the quotation within 48 hours.}

^{6. Using the first-rank raw materials which also can be traced.}

^{7. Provide the most competitive price with the high quality and service standard.}

^{8. The most reasonable packing scheme for all products.}

Toxmann Core Value and Culture:

^{Business Philosophy:}

^{1. Quality is the soul of an enterprise.}

^{2. Competitive price is our advantage.}

^{3. Enthusiastic service is our tenet.}

^{4. Innovation is our eternal pursuit}

^{Quality Objectives:}

^{1. Sample acceptance rate reaches 100%.}

^{2. The qualified rate of finished products reaches 100%}

^{3. Punctual delivery rate reaches 100%}

^{Our Mission:}

^{1.Strengthen management and continuously enhance satisfaction for customers, investors, suppliers and employees.}

^{2. Enhance innovation capacity and contribute to sustainable development.}

FAQ:

Q1: What is mold core and cavity?
A: The core is the male part which forms the internal shape of molding. The cavity is the female part which forms external shape of molding.
 

Q2: What is core in injection molding process?
A: Cavity and core are used in the injection molding process, where the concave part of the mold is the cavity and the convex part is the core. The cavity and core are used in pairs, with the cavity also referred to as the female mold and the core as the male mold.
 

Q3: What is core in plastic injection molding?
A: Core is the side of the tool where the plastic part is injected from; also known as the bottom half of the tool. The upper half of the mold is called CORE.
 

Q4: Why core is used in mold cavity?
A: The core and cavity are the two halves of the mold where the hot molten plastic material is injected into the core and cavity and the gap between the core and cavity is filled with the hot molten material during the injection molding process and then hardened into the final shape.
 

Q5: What is a core material?
A: Core materials are usually made from paper, polymeric foams and wood which are all highly flammable. These core materials are fully encapsulated within the laminate, hence are not directly exposed to fire.​